Shanghai Xuanchen Machine Facture Co., Ltd.
Main products:Jacketed Kettle,Colloid Mill,Sterilization Equipment,CIP
Products
Contact Us
  • Contact Person : Mr. Zhu Xuwu
  • Company Name : Shanghai Xuanchen Machine Facture Co., Ltd.
  • Tel : 86-021-37566093
  • Fax : 86-021-37566093
  • Address : Shanghai,Shanghai,Room 520, 5th Floor, Building A, No.97 Fengpu Avenue,Fengxian Distrcit,Shanghai
  • Country/Region : China
  • Zip : 201499

split colloid mill of JMF-280

split colloid mill of JMF-280
Product Detailed
JMF-280 Split Colloid Mill 1,SUS304 2,high efficiency 3,motor wrapped by stainless steel 4,no pollution

Colloid Mill can be divided into stainless steel colloid mill and half-formed stainless steel colloid mill. The basic principles is when fluid and semi-fluid material go through the fixed gear and moved gear which is high-speed relatively linked, can be influenced by strong shear, friction and high-frequency vibration, and be effectively crushed, emulsified, homogenized. So that precision products can be made.

 

 

Classification of Colloid Mill

1. According to Structure: there are Vertical Colloid Mill and Split Colloid Mill

2. According to Angle of Appearance: there are Ordinary Colloid Mill and Sanitary Colloid Mill

 

Structure of Colloid Mill

The main structures of colloid mill are grinding parts, the base transmission department and dedicated motor. The dynamic and still millstones in the core part and mechanical seal parts are the most key parts. Therefore, according to the different natures of the materials, the selection must be different. But the materials are made of stainless steel or specific materials. The motor need to be designed specifically, depend different model. The motor flange should install retaining plate to prevent leakage.

 

Usage of Colloid Mill

1. Food Industry: dairy products, chocolate, soy sauce, jam, peanut butter, butter and beverage

2. Chemical Industry: paints, lubricating oil, spices, dyes, emulsified asphalt, emulsified rubber, catalyst, paint coating etc.

3. Pharmaceutical Industry: cod liver oil, athlete cream, bee honey, pollen etc.

4. Daily Chemical Industry: shoe polish, toothpaste, cosmetics, balsam, soap, and detergent, etc

5. Other Industry: building industry, paper industry, plastic industry, battery industry, etc

 

 

Characteristics of Colloid Mill

Relative to the pressure-type homogenizer, colloid mill first is a kind of centrifugal equipment. It has the advantages of simple structure, convenient maintenance and is suitable for high viscosity materials and large particles materials. Also, its main drawback is determined by its structures. First, as for the centrifugal movement, the flow is not constant, corresponding to viscous material, the flow vary greatly. For example, the same equipment, in dealing with viscous lacquer and thin dairy fluid, the flow speed can differ 10 times above. Second, because of the high-speed friction between the stator and material, it is easy to generate large quantity of heat, and make the material processed. Third, the surface is easy to wear, and after wearing, the refined results will be significantly reduced.

 

 

 

Technical parameters of Colloid Mill

Model

JML-50

JML-80

JML-100

JML-120

JMF-80

JMF-100

JMF-120

JMF-140

JMF-180

Emulsification fineness um (single cycle or multi-cycle)

5~40

3~40

2~40

2~40

3~40

2~40

2~40

2~40

2~40

Adjustment range mm

1-0.01

1-0.01

1-0.01

1-0.01

1-0.01

1-0.01

1-0.01

1-0.01

1-0.01

Output t/h change according to materials

0.01-0.2

0.3-1

0.5-2

0.7-3

0.3-1

0.5-2

0.7-3

1-4

2-5

Motor

Power kw

1.1

3

5.5

7.5

4

5.5

7.5

11

15

Pressurev

380

380

380

380

380

380

380

380

380

Stirring speed r/min

2880

2880

2880

2880

2880

2880

2880

2880

2880

Grinding diameter mm

50

80

100

120

80

100

120

140

180

Discharge port diameter

15

25

32

40

25

32

40

40

65

Coolin water pipe

1/8

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

Dimensions

Length mm

420

520

560

560

640

750

750

820

980

Width mm

280

400

420

420

550

620

620

700

800

Height mm

760

900

950

950

1030

1080

1080

1250

1550

Weight kg

45

84

113

135

210

275

295

325

450

 

Notes of Colloid Mill

1. The parameters in the chart are standard configuration. Any specific requirements, please let us know.

2. JML-50 is experimental colloid mill, also can be changed to 220V voltage.

3. The process parameters that need provided when choosing the Colloid Mill: the nature of material, working pressure, temperature, specific requirements, etc.

split colloid mill of JMF-280



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.